Supported
The exact model, connection method and listed features completed our current qualification checks.
Compatibility
Know what works before you build
We test exact models, versions and features so you can choose devices with confidence. Finding a device on the network does not always mean every function is ready yet.
How to read the list
Only active compatibility candidates
This page contains only devices that are supported, in active beta testing or have a concrete path to support. Unrelated and unsupported bench devices are intentionally omitted.
Beta
The integration works in current testing, but one or more commercial qualification checks are still open.
Potential support
The device has a current implementation or test path, but is not ready to rely on yet.
Controller Mini
Exact-model compatibility and active integrations
Check the model, controller and available functions on each card. Controller Pro development integrations are identified separately from Mini and Controller support.
Reviewed 7 October 2026
Supported
BLE sensor
Shelly BLU H&T Gen3
Temperature and humidity sensor
- Connection
- BLE using BTHome
- Controller
- Controller and Controller Mini
Confirmed so far
Model SBHT-003C has passed discovery, binding, live temperature, humidity and battery reporting, rename, removal, rebind and automation tests. It is supported on Home Ecosystems Controller and Controller Mini.
In an ecosystem
Monitor temperature and humidity in a habitat zone
Limits before use
The sensor reports through periodic BTHome BLE advertisements. Discovery and value refresh can therefore take up to the device's normal reporting interval unless the sensor is woken.
Setup tutorialAdd a Bluetooth sensor
Supported
Wi-Fi light
Shelly Duo Tunable White Gen3 E27
Duo Bulb E27 Gen3, S3BL-D010009AEU
- Connection
- Wi-Fi through controller AP
- Controller
- Controller and Controller Mini
Confirmed so far
This Gen3 tunable-white bulb joined the Controller Mini access point and bound as an external lighting channel. Supported controls are on/off, dimming and tunable white on Controller and Controller Mini.
In an ecosystem
Shape tunable-white light through a daily pattern
Limits before use
Applies to the named Gen3 bulb, not other Shelly Duo generations.
Setup tutorialAdd a Shelly Wi-Fi device
Supported
Wi-Fi light
Shelly Multicolor (Duo Color) Gen3 E27
Multicolor Bulb E27 Gen3, S3BL-C010007AEU
- Connection
- Wi-Fi through controller AP
- Controller
- Controller and Controller Mini
Confirmed so far
This configured Gen3 colour bulb joined the controller network and its device record was restored. Supported controls are on/off, dimming, RGB colour and tunable white on Controller and Controller Mini.
In an ecosystem
Add dimmable colour and white lighting
Limits before use
Applies to the named Gen3 multicolour bulb, not other Shelly colour bulbs.
Setup tutorialAdd a Shelly Wi-Fi device
Supported
Wi-Fi switch
Shelly Plug S (MTR) Gen3
Switching support; power metering is not yet exposed
- Connection
- Wi-Fi through controller AP
- Controller
- Controller and Controller Mini
Confirmed so far
Controller-managed discovery and onboarding, controller-AP joining, stable binding, online state and physical on/off control have been confirmed on Home Ecosystems Controller and Controller Mini.
In an ecosystem
Switch a suitable mains-powered ecosystem device
Limits before use
The supported integration controls on/off state. Power metering is not currently exposed in Home Ecosystems.
Setup tutorialAdd a Shelly Wi-Fi device
Supported
Wi-Fi LED controller
Shelly Plus RGBW PM
Model SNDC-0D4P10WW; RGBW, RGB and Light profiles
- Connection
- BLE discovery and Wi-Fi RPC
- Controller
- Controller and Controller Mini
Confirmed so far
Controller-managed onboarding and operation are supported in two user-selectable modes: one RGBW light with switching, dimming and colour control, or four independent white dimmer channels. Four-channel command and state readback passed on the physical test unit.
In an ecosystem
Control compatible LED strips or four white dimming channels
Limits before use
Selecting or changing the Shelly output profile reboots the device and changes its channel layout. This entry does not include the older Shelly RGBW2.
Setup tutorialConfigure Shelly Plus RGBW PM · Guide in preparation
Beta
BLE sensor protocol
Generic BTHome v2 sensors
Unencrypted BTHome v2 on service UUID 0xFCD2
- Connection
- BLE advertisements
- Controller
- Controller and Controller Mini
Confirmed so far
Supported measurements are temperature, humidity and battery. Known test examples are Shelly BLU H&T Gen3 and unidentified generic BTHome temperature/humidity sensors seen during the controller scan.
In an ecosystem
Explore unencrypted BTHome temperature and humidity readings
Limits before use
This does not promise support for every BTHome device. Encrypted BTHome and other measurement objects are not part of the current supported protocol subset.
Setup tutorialAdd a Bluetooth sensor
Supported
Wi-Fi switch
Shelly Power Strip 4 Gen4
Four individually controllable outlets
- Connection
- Wi-Fi RPC
- Controller
- Controller and Controller Mini
Confirmed so far
Physical controller-managed onboarding has been confirmed. The complete strip uses one external-device slot and exposes four individually controllable outlet channels on Controller and Controller Mini.
In an ecosystem
Control four suitable loads as separate outlets
Limits before use
Compatibility applies specifically to Shelly Power Strip 4 Gen4 using Shelly RPC.
Setup tutorialUse Shelly Power Strip 4
Supported
Wi-Fi sensor host
Shelly The Pill
S3SN-0U53X with one temperature probe
- Connection
- Wi-Fi RPC
- Controller
- Controller and Controller Mini
Confirmed so far
Factory-state discovery, controller-managed onboarding, connected-temperature-component identification, binding persistence after a controller firmware flash and reboot, live temperature reporting, periodic component re-detection and the external-device rename endpoint have passed on the Pill.
In an ecosystem
Measure one connected temperature probe
Limits before use
One connected temperature probe is supported. A final destructive remove/rebind check is still scheduled. A single temperature/humidity add-on is in Beta pending a physical sensor-swap and live-humidity test. Multiple temperature probes and analog, digital or SSR add-ons remain potential support and are not yet commercially qualified.
Setup tutorialAdd a Shelly Wi-Fi device
Supported
BLE plant sensor
Xiaomi Mi Flower Care
MiBeacon families HHCCJCY01, GCLS002 and HHCCPOT002
- Connection
- Unencrypted Xiaomi MiBeacon BLE
- Controller
- Controller and Controller Mini
Confirmed so far
A physical Xiaomi Mi Flower Care unit has been tested and is supported on Controller and Controller Mini. The firmware recognises the listed MiBeacon families and parses temperature, illuminance, soil moisture, soil conductivity and battery readings.
In an ecosystem
Monitor plant and substrate conditions
Limits before use
Unencrypted MiBeacon only. The family list describes firmware recognition; it does not mean that every related hardware revision was physically tested.
Setup tutorialAdd a Bluetooth sensor
Beta
BLE temperature and humidity sensor
Xiaomi Mi Temperature & Humidity Monitor 2
LYWSD03MMC, stock firmware
- Maker
- Xiaomi
- Type
- BLE GATT sensor
- Connection
- Verified-model BLE GATT
- Controller
- Controller Pro only (development integration)
- Functions
- Temperature and humidity reading
Confirmed so far
The stock LYWSD03MMC model has returned verified-model GATT temperature and humidity readings on a Controller Pro development build.
In an ecosystem
Monitor a Pro ecosystem zone after installation qualification
Limits before use
Continuous background sampling and Controller Pro hardware acceptance remain open. Stock versions requiring authentication may not expose readable GATT data. This is not a Controller Mini or standard Controller integration.
Setup tutorialAdd a Bluetooth sensor
Have another model?
Check before you buy or connect
Send us the exact product name, generation and a photo of the label. We will tell you what is known and add useful test candidates to the qualification queue.